Tools/Maintenance

Torque wrenches are an essential bicycle tool. The increase in carbon fiber bikes and components have driven this need. While carbon fiber allows for more optimal design and provides higher strength to weight ratio compared to steel and aluminum, it is also more susceptible to crushing and cracking when improperly set up. Pedro's Fixed Torque Drivers are shop quality preset torque wrenches designed with an infinite torque-limiting clutch design to eliminate over-torquing of critical parts. Each wrench is calibrated using a torque calibration analyzer accurate to +/- 1% and is then tested 5 times prior to packaging with results recorded on the product card along with the date. A magnetic socket drive accepts standard 1/4" hex bits and 4mm, 5mm, and T25 bits are included with each wrench. The ergonomic handle design provides comfort and control ready for daily use while also storing two extra bits. - Infinite torque-limiting clutch design eliminates over-torquing - Magnetic socket drive accepts standard 1/4" hex bits. 4mm, 5mm, & T25 bits included - Ergonomic handle design provides comfort and control and stores extra bits

Foaming Bike Wash RTU Spray Bottle - Advanced plant-derived surfactants quickly remove tough dirt and grime from the whole bike. - Use on the whole bike without risk of damage or washing away grease/lube from critical parts. - Safe, biodegradable, phosphate-free, solvent-free, plant-derived, and zero-VOC. - Available in ready-to-use (RTU) trigger sprayer bottles and 16X Concentrate. The improved Green Fizz bike wash safely, naturally, & effectively removes tough dirt & grime from the whole bike. Developed specifically for bicycle washing, Green Fizz can safely be used on any material without risk of damage or washing away grease/lube from critical parts. The pre-activated, biodegradable formula uses advanced plant-derived surfactants and incredible foaming action to reach surfaces and loosen dirt allowing it to be easily wiped or rinsed away leaving your bike looking like new. Free of harsh chemicals, gentle enough to use on any material, fully biodegradable, phosphate-free, solvent-free, plant-derived, and zero-VOC. Our 16X concentrate offers great value, reduction in packaging, and reduced shipping costs. 16oz of concentrate makes 8+ Liters of Green Fizz RTU!

Green Fizz's biodegradable solvent-free formula can be safely used on all parts and materials, including carbon fiber, without washing away grease and lubricants or damaging delicate parts. - Advanced plant-derived surfactants quickly remove tough dirt and grime from the whole bike - Use on the whole bike without risk of damage or washing away grease/lube from critical parts - Safe, biodegradeable, phosphate-free, solvent-free, plant-derived, and zero-VOC - Can be used with or without water

- Most universal Pedro's lube - New high-performance formula lifts dirt away from the chain surface leaving a soft, Icy-Slick protection/Lubrication barrier

Oranj Peelz has quickly and effectively degreased drivetrains for more than twenty years using a unique citrus-based solvent/surfactant blend. Designed specifically for bicycle drivetrain degreasing, the powerful, biodegradable formula penetrates into every surface and quickly loosens and dissolves even the toughest drivetrain grime. The water-soluble formula rinses easily leaving surfaces residue-free. - Unique citrus-based solvent/surfactant blend quickly dissolves away grease and grime. - Low surface tension allows superior penetration allowing the degreaser to remove contamination from all surfaces of the drivetrain. - Biodegradable, water-soluble formula easily rinses away.

Socket Tool For Shimano® and ISIS Drive® Splined 20-Tooth BB Cups - Fits all Shimano® and ISIS Drive® splined 20-tooth bottom bracket cups and other cartridge bottom brackets. - Updated design features a square 3/8" drive. Also works with Pedro's snap-channel Pro Socket Handle, 24mm socket or wrench, or in a bench vise. - Professional quality, precision sized for the perfect fit. Pedro's socket tools provide the professional quality, precision fit tools required to properly install, remove, and adjust modern drivetrain components. Pedro's designed each socket tool to fit perfectly protecting the component and ensuring simple and safe usage for the mechanic. The updated Splined Bottom Bracket Socket features a square 3/8" drive. The socket also works with Pedro's snap-channel Pro Socket Handle, 24mm socket or wrench, or in a bench vise. For tough bottom bracket jobs, make sure to check out the BB Socket Holder designed to help hold the Splined Bottom Bracket Socket in place. The 20-tooth pattern fits a variety of cartridge style bottom brackets that feature square taper, Octalink®, ISIS Drive™, and other similar spindles including models from FSA®, Shimano®, Truvativ®, Race Face®, and others.

Park combines the three most used bolt sizes into one convenient wrench. The 3-Way Sprocket Wrench sports 8, 9 and 10mm sockets made from forged chrome-vanadium steel in Park's classic Y-shape that offers plenty of leverage and a comfortable grip.

Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-1 FEATURES - 4mm, 5mm, and 6mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit

The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.

Park's BBT-32 is the perfect solution for the home mechanic installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-32 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup and features 32mm wrench flats.

Park's BBT-18 is a heavy duty, investment cast tool for installing and removing all Shimano, ISIS Drive, and ISIS Overdrive 8-notch bottom bracket cups.

The Bottom Bracket Wrench removes and installs Shimano Hollowtech II, Race Face X-type, FSA MegaExo, Campagnolo Ultra-Torque and TruVativ Giga X-pipe bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 cup notches, while the other end engages the 8 internal splines of the crankarm adjustment cap.

Park's Bottom Bracket/Cassette Tool for Campagnolo is an indispensable tool for your Campagnolo drivetrain. It's for installing and removing all Record, Chorus, Centaur and Athena bottom brackets, and all Campagnolo cassette lockrings.

The CC-4 is a drop-in style gauge that measures bicycle chain wear. The laser cut CC-4 accurately measures a long section of chain and strategically comes in contact with the chain in three places, quickly and easily taking the guesswork out of knowing when chain replacement is necessary. A worn chain will cause poor shifting as well as accelerate drivetrain wear. The tool works on any 5 to 12-speed derailleur chain (including SRAM AXS) and is designed to accurately indicate when a chain reaches .5% and .75% wear, the points at which most chain manufacturers suggest replacement.

A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. The Chain Gang includes: - CM-5.3 Cyclone Chain Scrubber - GSC-1 GearClean Brush - 8 oz. bottle of Bio ChainBrite The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.

A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf

Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut

The Park Tool FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs. -Utilizes a 12mm guide pin to stabilize the tool during use - Fits 12-spline cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter) - Fits some Shimano and similar disc brake rotor lockrings

Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool

A fast and convenient tool to remove and install 12-spline Shimano/SRAM style cassette lockrings, as well as similar lockrings on rotor discs. The FR-5H features a modified FR-5 tool that allows use without removing most quick release skewer nuts. The removable, threaded steel handle makes it possible to replace a worn or damaged head. - Fits Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and other cassette lockrings - Also fits some Shimano disc brake lockrings

The FR-5GT specifically allows you to remove and install cassette lockrings from thru axle hubs. - Utilizes a 12mm guide pin to stabilize the tool in use - Fits 12-spline cassette lockrings from Shimano , SRAM, SunRace, SunTour, Chris King and others (23.5mm diameter) - Fits some Shimano and similar disc brake rotor lockrings

To prevent poor shifting and uneven drivetrain wear, most manufacturers recommend chain replacement at or before 1% stretch. Now you can quickly and accurately determine the wear and stretch of any chain with Park's Chain Checker. Simply insert the Chain Checker’s pins into 2 links, press the swingarm gauge tight, and then check the gauge window for an accurate reading!

Park's Chain Gang contains everything needed to quickly and easily clean chains, cassette/freewheel cogs and chainrings so that your shifting works perfectly and your parts last and last. You get Park's Cyclone Chain Scrubber, GearClean Brush, and their CB-2 Citrus ChainBrite (8-ounce bottle). Simply fill the Cyclone Chain Scrubber to the line with ChainBrite, snap the cleaner onto the chain, hold the cleaner's handle and pedal your bike by hand. Like magic, the brushes inside the cleaner turn and scrub the chain clean (a magnet in the bottom retains any metal bits that come off the links). Then to finish the job, simply use Park's brush and some rags to clean the cogs and chainrings.

Park's Crank Puller is for removing crankarms on Shimano's splined, oversize, pipe-billet bottom brackets. It employs a long handle and a fine thread for the leverage and torque needed to remove tight arms. Park's unique rotating tip ensures smooth operation and long life. (The CCP-44 does not fit standard square or tapered bottom brackets.)

A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.

Now you can easily tackle any crank bolt with Park's Crank Wrench. It features a dual-sided head with a 14mm socket and 8mm Allen wrench on a long, vinyl-coated handle so you're sure to have the leverage necessary for the job.

Also called a sleeping hub, the Dummy Hub slides into rear dropouts and replaces the rear wheel for chain cleaning and transport. The DH-1 works with all derailleur and 1/8" chain. The unique design allows the bike to be shifted and works with open dropout and thru-axle frames up to 12mm.

Park's FR-1.2 Freewheel Remover fits Shimano freewheels made since 1985. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.

The Park FR-3 Freewheel Remover fits SunTour four-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.

Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.